japanese23hdxxxxfree日本_国产免费AV片在线无码免费看_免费女人18毛片a毛片视频_特黄一区二区_97涩涩影音先锋_杏导航aⅴ福利网站

DIW-20CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIW-75CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

DIW-120CEDAR思達數顯扭力扳手

Screw tightening control
仠 DIGITAL TORQUE WRENCH  DIW-120/75/20/15
（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple
＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable） ＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB） ＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.
NEW丂DEVELOPMENT Wrench head awivels 300亱  
Specification DIW-15 DIW-20 DIW-75 DIW-120
Measuring range  N丒m （at the time of Track） 0.20 - 15 N 0.20 - 20 N 0.20 - 75 N丒m 2.0 - 120 N丒m
2.0乣150 kgf丒cm 2.0乣200 kgf丒cm 2.0乣750 kgf丒cm 20乣1200 kgf丒cm
2.0乣130 lbf丒in 2.0乣180 lbf丒in 2.0乣650 lbf丒in 20乣1040 lbf丒in
Accuracy 亇0.5% （F/S） （199 or less digit亇1digit）  亇0.5% （F/S） （499 or less digit亇3digit） 亇0.5% （F/S）  （199 or less digit亇1digit乯
Display The 4 figures digital display of LCD
The measurement direction CW-CCW （rightleft）
Measuring mode P-P  Peak Holding Peak Load Value
T-R  Track Showing Real time torque value （ Used for Zero-Adjustment ）
P-D  Peak down Holding Load Value at the moment to change from upward to downword
C Real-time output Load torque value is outputted every about1/ 160 second
Decision function Setting of torque value Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec. Data transfer ASCII format （Baud rate : 19200）
Data memory 800 data / ten channels data
A setup of the number of counts One to 99 count   （count in a direction with a bundle）
Auto power save 10 minutes no use, automatically switch off.
Charging time From empty - less than 5hours
Continunous working time 12 hours
Outside size 冇34（grip）亊236（L） 冇34（grip）亊235（L） 冇34（grip）亊320（L） 冇34（grip）亊445（L）
Weight （about） 430g 470g 620g 830g
Socket engagement 6.35  square, including steel ball 9.5 square, including steel ball 12.7 square, including steel ball
Attachment - One-way socket
Accessories  （one piece each） AC/DC adaptor
An inspection report, a proofreading certificate, a traceability system figure

最新產品
熱門儀器： 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計（PH計） 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板： 韩国三级毛片 | 亚洲国产欧美在线人成最新 | 绯色av| 萍萍的性荡生活第六季 | 天堂网在线最新版www | 99小视频在线观看 | 麻豆国产丝袜白领秘书在线观看 | 日韩婷婷 | 国产精品一区二区在线免费观看 | av中文一区二区三区 | 成人高清视频免费观看 | 色婷婷五月综合亚洲小说 | 亚洲爆乳无码精品AAA片蜜桃 | 亚洲AV久久久噜噜噜赌场 | 国产一级毛片黄片 | 在线播放国产视频 | 青青草国产免费无码 | 国内精品伊人 | 成午夜精品一区二区三区 | 亚洲大片精品永久免费 | 国产h视频在线观看播放 | 欧美一区二区三区四区视频 | 日本丰满大屁股少妇 | 九一黄色片 | 久久久久久久久一 | 中文字幕免费在线观看动作大片 | 国产精品视频玖玖国产 | 欧美亚洲国产成人一区二区三区 | 国产日韩在线观看视频 | 一a一片一级一片按摩师 | 大胆欧美熟妇xxbbwwbw | 三年成全免费观看国语高清 | 亚洲精品国产精品成人不卡 | 久久久九九九九执 | 少妇伦子伦情品无吗 | 日韩AV片无码一区二区三区不卡 | 久久美女色视频 | 99一级片 | 日本久久久久久久做爰片日本 | 亚洲人精品亚洲人成在线 | 日韩午夜福利 |